The Fogmaster Vectra-Jet ULV™ 7505 fogger allows precise adjustment of particle size, under 7 micron VMD, for ultra low volume application. This allows use of more concentrated fogging solutions, and speeds up treatment time -- at typical ULV application rates, the Vectra-Jet covers 2-4,000 cubic feet per minute.)
A 9-turn precision needle valve controls liquid output and droplet size. Set the valve to a low flow rate to produce near-invisible ULV droplets. For heavier fogs and mists, Increase the flow rate. Once the valve has been set, you can use the vernier calibration to return to the same setting, or snap a lock ring to prevent accidental changes.
Chemical flow rate is easily calibrated in the field to adjust for differences in liquid density, viscosity or surface tension. And since the Micro-Jet handles both water- and oil-based liquids, this one machine can satisfy all your fogging requirements.
The Vectra-Jet ULV is widely used in schools, restaurants, zoos, barns, hotels, and similar locations requiring professional application. Light-weight, and supported by our One-year limited warranty, the Fogmaster Vectra-Jet ULV is an outstanding choice.
PO Box 15 | Clarks Summit, PA 18411 | Phone: 717-489-1728 | Fax: 717-489-0228
Copyright © 2008 Bio Shield Technologies. All Rights Reserved.
Powered by Volusion. |